DMR DeathGrip2 Flangeless Thick (Choice of Colour).
Pricing
| Options | black (Item# 5055308130411 DMR-G-001-001) In Stock red (Item# 5055308130459 DMR-G-001-005) In Stock blue marble (Item# 5055308130428 DMR-G-001-002) In Stock camo (Item# 5055308130435 DMR-G-001-003) In Stock snow camo (Item# 5055308130466 DMR-G-001-006) In Stock |
|---|---|
| Description | TAPERED CORE No need for outer lockring, with a secure hold. WAFFLE For comfortable finger placement and confident grip. KNURL For all over grip in all conditions. MUSHROOM For comfort in thumb and forefinger area. THICKNESS 31.3mm FLANGELESS For your preferred grip setup. COMPOUND 20A durometer. LIGHTWEIGHT Just 100g per pair Tapered core for secure fit Soft krayton rubber outer Compounds: 20A durometer Exposed plastic core for durability Injection moulded DMR logo end cap Slimline aluminium lock-ring collar Single lock-ring bolt torque to 2Nm Available in thick (31.3mm) 135mm long INSTALLATION Please follow these instructions carefully to install your new DMR Deathgrips: Remove your old grips and bar end plugs. Thoroughly clean and degrease the handlebar. Ensure there is at least 130mm of free bar space for each grip. If necessary, move your controls to create the required space. Fit the new DMR Deathgrips onto the handlebar by pushing them on all the way until they won't go any further. You may need a soft faced mallet or similar to tap them on to fully engage the unique taper-end of the Deathgrip. Make sure the collars are fully located on the grips and tighten the collar bolts to torque (2nm). Do not overtighten the collar bolts, only tighten them enough that the grips will not rotate under force. Confirm that the grips and controls are securely in place. Twist the grips hard to ensure they do not move. NOW GO RIDE! |
As with any product, specification is subject to change without prior notification. You are advised to confirm current availability and specification before buying.